2004-D 50C MS68 认证号21684778, PCGS号6787
拥有者评论
Type: Kennedy Half Dollar, Type 3, Copper-Nickel Clad (1971- )
Designer: Gilroy Roberts / Frank Gasparro
Content: 75% Copper, 25% Nickel over a pure Copper center
Weight: 11.30 grams
Diameter: 30.61 millimeters
Edge: Reeded (150 reeds)
Mint: Denver
Production Strikes: 2,900,000
General Type Description: Beginning in 1971, all silver was removed from the Half Dollar, in favor of the same copper-nickel clad alloy that had been in use on Dimes and Quarter Dollars since 1965. Mintages remained low relative to all other denominations, with the result that the Half Dollar was seldom used or seen in circulation (a situation that persists today). Though somewhat lengthy, this series is easy and affordable to collect as either circulation strikes, Proofs, or both. Some dates, such as 1987-P and D, 2001-P, 2002-P and D, and others were not issued for circulation but are available only in Mint sets, adding a bit of a challenge. Major varieties include a 1972 No “FG” and a 1974 Doubled Die Obverse. (Source:: Guth, Ron. PCGS CoinFacts)
Exemplar Notes: One of less than three dozen graded as MS68 with none finer (as of 5/2016). This gem was acquired 4/2012 from Michael Zerbini.
Photography/Imaging c/o Todd Pollock, BluCCPhotos.com
PCGS #
6787
设计师
Gilroy Roberts/Frank Gasparro
边缘
150 Reeds
直径
30.61 毫米
重量
11.30 克
铸币数量
2900000
金属成分
75% Copper, 25% Nickel over a pure Copper center
更高评级数量
0
评级较低的钱币数量
751
地区
The United States of America
价格指南
PCGS 数量报告
拍卖 - PCGS 评级的
拍卖 - NGC 评级的
稀有性和存量估计 了解更多
所有评级 | 2320000 |
60或以上 | 2296800 |
65或以上 | 918720 |
所有评级 | R-1.0 |
60或以上 | R-1.0 |
65或以上 | R-1.1 |
所有评级 | 1 / 62 TIE |
60或以上 | 29 / 62 TIE |
65或以上 | 55 / 62 TIE |
所有评级 | N/A |
60或以上 | N/A |
65或以上 | N/A |
状况普查 了解更多
#1 MS68 PCGS grade |
#1 MS68 PCGS grade |
#1 MS68 PCGS grade |
#1 MS68 PCGS grade |
#1 MS68 PCGS grade |